INDUCTANCE, FILTERS & CHOKES

Filters and chokes are part of electronic Power Supplies and their primary mission is to protect final users from the waves that some electronic devices produce.

On the other hand, inductors are in charge of storing energy throughout a self-induction process and reducing the energetic loses of the other electronic components.

INDUCTORS

Filters for electromagnetic interference (EMI/RFI)

	LxW (mm)	H (mm)
0406	1µ - 1mH	0.14 - 4.5A
0608	1µ - 1mH	0.20 - 2.10A
0810	100µH - 1mH	0.45 - 1.04A
0912	100µH - 1mH	0.53 - 1.70A
1216	15µH - 1mH	0.45 - 3.3A
1415	22µH - 1mH	1.4 - 8.8A
1618	22µH - 1mH	2.5 - 14A

* The first two digits indicate the diameter of the core. The last two digits refer to its height. Approximately. ** Other inductance values available on request. *** The current depends on the inductance value

Radial and axial components
Small footprint

Shielded designs for low emission
Possibility of epoxy filling

AC LINE FILTERS EE-ET-UI-UT-UU

(From units to tens of Henries)

Minimum dispersion inductance for symmetric suppression of interference
Isolation: minimum from 500V
Possibility of other formats

FORMATS WITH AIR CORE

These are characterised by the fact that their inductance value remains constant regardless of the current and by the fact that there is no saturation effect.

Used when the current and power level is high
Used for Wireless applications
Possibility of adaptation to shapes required by customers

CHOKES

Used to filter signals on power lines.

Chokes in common mode and differential mode for power lines
THD and SMD, vertical and horizontal formats

Extensively used in interference suppression, SMPS (tabletop PCs, air conditioning systems, cleaning equipment, battery chargers, audio applications, ceramic/induction hobs or any other switched-mode application, etc.)

Excellent temperature and humidity resistance characteristics.

DOWNLOAD BROCHURE

CONTACT